According to official rules, each board needs to be 4 feet long and 1 foot wide. Since this is a 3-hole type of game, logically, each board needs to have 3 separate holes with 12-inch space between each hole. Washers should be galvanized and have 2-1/2 inch in diameter and 1/8 inch thick.Click to see full answer. In this manner, what are the dimensions of a 3 hole washer board? Official 3 Hole Washer Board Dimensions: 12 inches wide by 48 inches long. how do you make a hole in a washer board? Cut a hole 1/4″ larger than the washer all the way around (1/2″ diameter larger). Covered in carpet and glued a capped piece of PVC underneath to catch the washers. Put an eye in the front of each board and cut light chain with clips in a length that makes the center of the holes 21′ apart when pulled tight. Similarly, you may ask, how do you make a 3 hole washer board? Instructions: Begin by cutting 2 sheets of 3/4 inch plywood, each 18×48 inches. Cut 2×2 boards with mitered corners that will be used as the frame, attach these with 2 inch deck screws. Draw a line down the centre of your board and mark holes at the 7 1/2 inch, 15 3/4 inch and 24 inch marks.How do you score washers? Washers Game Scoring Scoring in washers is simple! A team earns one point if a washer lands inside the box. Three points are earned if a washer is inside the cup. Points cancel out so if you both land in the cup no points are scores.
ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBlkp60bq3RnmStoJVitbC4xKxkoqZdrK60tMSrZJunkaextHs%3D